Electrolube DCB Conformal Coating for Harsh Environment Electronics Protection
Product Properties
| Property | Value | Standard/Note |
| Liquid Properties | | |
| Appearance | Black Opaque | Visual |
| Density @ 20°C | 0.95 g/ml | Measured |
| VOC Content | 53% | Regulatory |
| Flash Point | 27°C | Safety |
| Solids Content | 47% | By weight |
| Viscosity @ 20°C | 300-450 mPa·s | Brookfield |
| Cured Film Properties | | |
| Color | Black Opaque | Visual |
| Operating Temp Range | -70°C to +200°C | MIL-I-46058C |
| Flammability | Meets UL94 V-1 | UL Standard |
| Thermal Cycling | Approved | MIL-I-46058C |
| Coefficient of Expansion | 85 ppm | Measured |
| Dielectric Strength | 90 kV/mm | Electrical |
| Volume Resistivity | 1×10¹⁵ Ω | @ 25°C |
| Dissipation Factor (@1MHz) | 0.044 | @ 25°C |
| Moisture Resistance | Approved | MIL-I-46058C |
| Coverage per litre @ 25μm | 18.8 m² | Calculated |
Product Introduction
DCB is a flexible, black opaque modified alkyd conformal coating specifically engineered for protecting electronic circuitry.Formulated to meet the highest defense standards in Europe and the US, it operates reliably in extreme temperatures (-70°C to +200°C) and is UL94 V-1 flammability certified.The coating offers superior solvent resistance (optimized at 120°C curing) and can be applied via spray, dip, or brush methods.
Enhanced Properties
DCB resists solvents used in aerospace/automotive industries. The heat-cured coating operates stably from -70°C to +200°C, with maximum solvent resistance achieved at 120°C curing.
Offers flexible curing schedules: Ambient (24h@25°C), Commercial (2h@20°C + 2h@90°C), Military (12h@25°C + 24h@90°C), meeting varied application demands.
Applicable by spraying, dipping or brushing (25-75μm thickness). Spraying requires 1:1 dilution with DCT thinners to 50-80mPa·s; dipping viscosity must be 180-250mPa·s.
Application Scenarios
Validated by Electrolube Tech Bulletin SCC3/2019 and industry cases:
- Aerospace: Satellite power control modules resistant to jet fuel (Jet A) and thermal cycling (-65°C to 150°C);
- Military Electronics: PCB protection in armored vehicle comms systems (MIL-STD-810G vibration certified);
- Automotive: Engine Control Units (ECU) resistant to gasoline/diesel and under-hood temperatures;
- Industrial: Oil drilling sensor circuits protected against H₂S corrosive gas and salt spray.
FAQ
1. Who are we?
We are Shenzhen Huazhisheng New Material Technology Co., Ltd., a professional industrial adhesives and sealants supplier based in China since 2018. we serve global markets: Mainland China (60%), Southeast Asia (20%), North America (10%), and Europe (10%).
2. What products do you offer?
we supply high-performance adhesives and sealants from global leaders including:
Cemedine, Dow Corning, Shin-Etsu, Araldite, and Momentive,etc.
3. How do you guarantee product quality?
Quality assurance through:
Mandatory pre-production samples approval
Final inspection by QC team before shipment
International certifications: SGS, UL, FDA, RoHS, REACH
4. Why choose us over other suppliers?
Reliable Supply:Authentic products from top manufacturers
Expert Support:Technical guidance for product selection
Global Compliance:Certifications meeting target market standards
Efficient Service:Customized solutions & professional support
5. What services do you provide?
Delivery:EXW/FOB/CIF
Payment:USD/EUR/CNY/HKD via T/T, L/C
Support:Technical consultation & logistics coordination
Product Tags:
|
|
DCB Electrolube Conformal Coating for Harsh Environment Electronics Protection Images
|
